20
Jan
Jboss web hosting - system is talking to the network. Try to
system is talking to the network. Try to ping the host you plan to install OpenBSD from or your default gateway. While not all the standard UNIX commands are available on the install disk, quite a few basic tools are. Type ‘exit’ to return to install. # ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.366 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.171 ms ^C— 192.168.1.1 ping statistics — 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/std-dev = 0.171/0.268/0.366/0.098 ms This indicates that the system can ping the default gateway, 192.168.1.1. Hit CONTROL-C to interrupt the ping. If, on the other hand, you issue the command and see nothing for several seconds, you have a connectivity problem. # ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1): 56 data bytes — 192.168.1.1 ping statistics — 3 packets transmitted, 0 packets received, 100% packet loss # Again, hit CONTROL-C to interrupt the test. In this case, confirm your IP address and default gateway are correct. Do you have a link light? Do basic network troubleshooting to identify the problem, and perhaps carefully inspect the output of the ifconfig command to try to identify any problems. Once you know you’re on the network, return to the installer by typing “exit”. # exit Page 74
Hint: This post is supported by Gama web hosting php mysql provider